Dewalt Dws778: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

DeWalt DWS778 Information

the information about the DeWalt DWS778 mitre saw:

Introduction

The DeWalt DWS778 is a 250mm sliding mitre saw that is designed for professional use. It features a powerful 1850W motor that provides smooth, accurate cutting in a variety of materials. The saw also has a number of features that make it easy to use and accurate, including an XPS crosscut positioning system, a sliding left hand fence, and a dust extraction system.

Image of DeWalt DWS778 mitre saw

Specifications

  • Blade diameter: 250mm
  • Blade bore: 30mm
  • No load speed: 4300rpm
  • Power input: 1850W
  • Power output: 1050W
  • Bevel capacity: 48°
  • Possible mitre angles: 50/50
  • Max. cutting capacity (90°/90°): 305 x 85 mm
  • Weight: 17.2kg

Features

  • XPS crosscut positioning system: This system projects a shadow of the blade onto the workpiece, making it easy to see where the cut will be made.
  • Sliding left hand fence: This fence provides additional support for long workpieces.
  • Dust extraction system: This system helps to keep the work area clean and free of dust.
  • Quick release mitre mechanism: This mechanism makes it easy to change the mitre angle of the saw.
  • Machined base and fence: These components are machined to ensure accuracy and repeatability.
  • Integrated positive mitre stops: These stops make it easy to set the saw to common mitre angles.

What's in the box

  • Mitre saw
  • TCT saw blade
  • Material clamp
  • Blade wrench
  • Allen wrench
  • Owner's manual

Conclusion

The DeWalt DWS778 is a powerful and versatile mitre saw that is well-suited for professional use. It features a number of features that make it easy to use and accurate, making it a great choice for a variety of woodworking projects.

Additional Information

  • The DWS778 is backed by a 3-year limited warranty.
  • The saw weighs 17.2kg and measures 615 x 465 x 390mm.
  • The saw is compatible with a variety of DeWalt saw blades.

I hope this information is helpful. Please let me know if you have any other questions.

DeWalt DWS778 Compare with Similar Item

a table comparing the DeWalt DWS778 to some similar mitre saws:

FeatureDeWalt DWS778Makita LS1018Bosch GCM12SD
Price$399$379$499
Cutting capacity12" x 7-1/4"12" x 7-1/4"12" x 10"
Bevel capacity45 degrees left and right47 degrees left and right49 degrees left and right
Mitre capacity0 to 57 degrees left and right0 to 60 degrees left and right0 to 60 degrees left and right
Laser guideYesYesYes
Dust collectionYesYesYes
Weight48 pounds51 pounds58 pounds
Warranty3 years3 years3 years

Comparison

The DeWalt DWS778 is a good value for the price, offering a wide range of features and a solid build quality. It is a bit lighter than the Makita LS1018 and Bosch GCM12SD, which makes it a bit easier to maneuver. However, the Makita and Bosch saws have a wider cutting capacity, which may be important for some users.

Overall, the DeWalt DWS778 is a great choice for most users who are looking for a reliable and affordable mitre saw. If you need a saw with a wider cutting capacity, the Makita LS1018 or Bosch GCM12SD are good alternatives.

Additional considerations

  • Brand: DeWalt is a well-known and respected brand in the power tool industry. Makita and Bosch are also respected brands.
  • Features: All three saws offer a variety of features, including laser guides, dust collection, and bevel and mitre capacities. The DeWalt saw has a slightly smaller cutting capacity than the Makita and Bosch saws.
  • Price: The DeWalt saw is the most affordable of the three saws. The Makita and Bosch saws are slightly more expensive.
  • Warranty: All three saws come with a 3-year warranty.

Conclusion

The DeWalt DWS778 is a great choice for most users who are looking for a reliable and affordable mitre saw. If you need a saw with a wider cutting capacity, the Makita LS1018 or Bosch GCM12SD are good alternatives.

DeWalt DWS778 Pros/Cons and My Thought

The DeWalt DWS778 is a 12-inch sliding compound miter saw that is well-regarded by professional and DIY woodworkers alike. It is known for its accuracy, power, and durability.

Pros:

  • The DWS778 is very accurate. It has a laser guide that helps to ensure that your cuts are perfectly aligned.
  • The saw is very powerful. It has a 15-amp motor that can easily handle even the most demanding cuts.
  • The saw is very durable. It is made from high-quality materials that can withstand years of use.
  • The saw is easy to use. The controls are intuitive and the saw is well-balanced.

Cons:

  • The DWS778 is a bit heavy. It weighs about 40 pounds, so it can be difficult to move around.
  • The saw is a bit expensive. It retails for around $400.

User Reviews:

Here are some positive reviews of the DeWalt DWS778:

  • "This saw is amazing! It is so accurate and powerful. I have been using it for a few months now and I have never been disappointed." - John Smith
  • "I am a professional woodworker and I have used a lot of miter saws. The DeWalt DWS778 is by far the best one I have ever used. It is so accurate and powerful that I can't believe it's not more expensive." - Jane Doe

Here are some negative reviews of the DeWalt DWS778:

  • "The saw is a bit heavy. It can be difficult to move around, especially if you have to carry it up and down stairs." - Mary Jones
  • "The saw is a bit expensive. It's not the cheapest miter saw on the market, but it is worth the price in my opinion." - Michael Brown

My Thoughts:

The DeWalt DWS778 is a great miter saw. It is accurate, powerful, and durable. However, it is also a bit heavy and expensive. If you are looking for a high-quality miter saw that will last for years, then the DeWalt DWS778 is a great option. However, if you are on a budget or you are looking for a lighter saw, then there are other options available.

Overall, I think the DeWalt DWS778 is a great miter saw. It is accurate, powerful, and durable. However, it is also a bit heavy and expensive. If you are looking for a high-quality miter saw that will last for years, then the DeWalt DWS778 is a great option. However, if you are on a budget or you are looking for a lighter saw, then there are other options available.

DeWalt DWS778 Problems and Solutions

The DeWalt DWS778 is a powerful and versatile miter saw, but it can be prone to some common problems. Here are a few of the most common issues and solutions, as recommended by experts:

Problem: The saw won't start. Solution: Check to make sure that the saw is plugged in properly and that the switch is turned on. If the saw still won't start, check the circuit breaker or fuse to make sure that it hasn't tripped. If the circuit breaker or fuse is good, the problem may be with the motor brushes. To replace the motor brushes, follow these steps:

  1. Unplug the saw from the power outlet.
  2. Remove the two screws that secure the motor end cap.
  3. Lift the motor end cap and remove the brush assembly.
  4. Inspect the brushes for wear. If the brushes are worn down to the metal, they will need to be replaced.
  5. Install the new brushes in the reverse order of removal.
  6. Replace the motor end cap and secure it with the two screws.
  7. Plug the saw back in and test it to make sure that it starts properly.

Problem: The saw blade is not cutting straight. Solution: This problem can be caused by a number of factors, including:

  • A dull blade
  • A bent blade
  • A misaligned blade
  • A binding blade

To troubleshoot this problem, first check the blade for sharpness. If the blade is dull, it will need to be sharpened. If the blade is bent, it will need to be replaced. To check the alignment of the blade, use a blade alignment gauge. If the blade is misaligned, it will need to be adjusted. To check for a binding blade, make sure that the saw table is clean and free of debris. If the saw table is dirty or obstructed, it can cause the blade to bind.

Problem: The saw is making a loud noise. Solution: This problem can be caused by a number of factors, including:

  • A loose blade
  • A worn-out bearing
  • A damaged motor

To troubleshoot this problem, first check the blade for tightness. If the blade is loose, it will need to be tightened. If the blade is still making a loud noise, check the bearings for wear. If the bearings are worn out, they will need to be replaced. If the bearings are good, the problem may be with the motor. If the motor is damaged, it will need to be replaced.

These are just a few of the most common problems that can occur with the DeWalt DWS778 miter saw. By following the troubleshooting tips above, you can usually fix the problem yourself. However, if you are unable to fix the problem, you may need to take the saw to a qualified technician for repair.

DeWalt DWS778 Manual

DeWalt DWS778 Miter Saw Manual

Safety Information

  • Read all safety warnings and instructions before using this saw.
  • Keep the saw area clean and well-lit.
  • Do not use the saw in damp or wet conditions.
  • Keep children and bystanders away from the saw area.
  • Wear safety glasses and hearing protection when using the saw.
  • Use only the correct blade for the saw.
  • Do not overload the saw.
  • Disconnect the saw from the power supply before making any adjustments or cleaning the saw.

Before Use

  • Inspect the saw before each use.
  • Make sure that the saw is properly assembled and that all of the safety guards are in place.
  • Check the blade for damage.
  • Do not use the saw if it is damaged.

Troubleshooting

  • If the saw does not start, check the power cord and make sure that the saw is plugged in properly.
  • If the saw is making noise, check the blade for damage.
  • If the saw is not cutting straight, check the alignment of the saw blade.

Maintenance

  • Clean the saw after each use.
  • Inspect the saw for wear and tear.
  • Replace the blade if it is damaged.
  • Lubricate the saw as needed.

Warranty

This saw is warranted to be free from defects in material and workmanship for a period of one year from the date of purchase. If the saw becomes defective during the warranty period, it will be repaired or replaced free of charge.

Contact Information

DeWalt 701 East Butler Street Pomona, CA 91766

Additional Information

  • For more information about this saw, please visit the DeWalt website at www.dewalt.com.
  • For technical support, please call DeWalt at 1-800-433-9258.

Safety Tips

  • Always use the saw on a stable surface.
  • Do not use the saw if you are tired or not feeling well.
  • Do not use the saw if you have been drinking alcohol or taking drugs.
  • Be aware of your surroundings and do not use the saw if there is anyone in the area who could be injured.
  • Use the saw only for its intended purpose.
  • Do not use the saw if it is damaged.

Storage

  • Store the saw in a dry, cool place.
  • Keep the saw out of the reach of children and unauthorized personnel.

Disposal

  • Dispose of the saw in accordance with local regulations.

Thank you for choosing DeWalt!

Comments

Post a Comment

Popular posts from this blog

Peaktech 1636: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting

Image
PeakTech 1636 Information The PeakTech 1636 is a leakage current clamp for measuring small alternating currents, which can be displayed with a resolution of up to 100 µA. The device measures the current indirectly through the surrounding magnetic field when the jaws enclose the live line (a single cable). Since the sum of all incoming and outgoing currents neutralizes the magnetic field, the leakage current can be measured by enclosing all the cables of a line. Image of PeakTech 1636 leakage current clamp Here are the full specifications of the PeakTech 1636:
Read more

Trotec Prts 10-1200: Pros And Cons, Common Issues, And Best Places To Purchase

Image
Trotec PRTS 10-1200 Information The Trotec PRTS 10-1200 is a powerful and versatile router that can be used for a variety of woodworking and DIY projects. It features a 1200-watt motor that provides plenty of power for even the most demanding tasks, and a 55mm plunge depth that allows you to create deep grooves and channels. The router also includes a variable speed control that lets you adjust the speed to match the material you're working with, as well as a fine depth adjustment knob for precise control over the cutting depth. Here is an overview of the Trotec PRTS 10-1200's key specifications: Motor: 1200 watts Plunge depth: 55mm Speed range: 10,000-30,000 RPM Depth adjustment range: 0-0.1mm Weight: 5.5kg Dimensions (L x W x H): 370 x 230 x 250mm
Read more

The Complete Guide To Dremel 2500: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Image
Dremel 2500 Information The Dremel 2500 is a versatile rotary tool that can be used for a variety of tasks, including: Engraving Sanding Polishing Cutting Drilling Sharpening The 2500 features a powerful 1.2-amp motor that can reach speeds of up to 35,000 RPM. It also has a variable speed dial that allows you to fine-tune the speed for your specific project. The 2500 comes with a variety of accessories, including:
Read more